Wet Grinding Equipment
Vertical Dual-Power Bead Mill
LSM vertical dual-power bead mills for advanced-material wet grinding. Compare model-specific chamber volumes and media ranges for electronic and battery materials.
Request Specifications & Quote
Prepared from Yushun’s 2026 knowledge base for preliminary selection. Specifications, translations and final configurations require engineering review; flow, output, fineness and energy savings are not universal guarantees.
Product Overview
How it works
Independent drives and dynamic separation coordinate grinding and media retention. Chamber volume and minimum media diameter vary by model, so model-specific data must guide selection.
How to choose
Provide composition, feed and target particle sizes, temperature and contamination limits, required output, viscosity and solids content. Reference data does not replace material trials; confirm units and operating conditions before quotation.
Dual-power vs. single-power vertical grinding
Compare related grinding equipment against the process requirements, not the model name or motor power alone.
Discuss the project
Browse the equipment catalog or send your process requirements. See the battery slurry application for context; application conditions require separate review.
Equipment configuration
Core Features
- Independent motor drives with a water-cooled permanent-magnet direct-drive design.
- Graded dynamic separation supports small-media process configurations.
- Double mechanical seal and pressure-protection configuration.
- Cleaning and solvent compatibility require formulation-specific review.
Configuration guide
Technical Specifications
| Series | LSM |
|---|---|
| Process | Wet grinding |
Reference specifications require material testing and engineering review. Final configuration is defined in the project technical agreement.
| Model | Motor power (kW) | Chamber volume (L) | Reference feed (L/min) | Media diameter (mm) | Approximate weight (kg) |
|---|---|---|---|---|---|
| LSM-2L | 13 | 1.3 | 3-5 | 0.03-0.3 | ≈1200 |
| LSM-5L | 22.5 | 3.8 | 5-10 | 0.03-0.3 | ≈1500 |
| LSM-7L | 30 | 4.7 | 10-20 | 0.03-0.3 | ≈2000 |
| LSM-20L | 56 | 20 | 30-60 | 0.05-0.3 | ≈3500 |
Where it works
Application Industries
- Electronic Ceramics
- Carbon Nanotubes
- MLCC and LTCC Materials
- Lithium Iron Phosphate
Technical questions
Frequently Asked Questions
Do all models accept 0.03 mm media?
No. LSM-2L, LSM-5L and LSM-7L list 0.03–0.3 mm; LSM-20L lists 0.05–0.3 mm. Confirm the actual configuration.
Does LSM-2L have a 2 L chamber?
The reference table specifies 1.3 L. Use the chamber-volume column rather than inferring volume from the model name.
Is D90 below 100 nm guaranteed?
No universal fineness or energy-input improvement is guaranteed. Trials must establish particle-size distribution for the actual formulation and process.
Can the mill process organic solvents?
Solvent compatibility, sealing, pressure protection and applicable safety measures require engineering review before selection.
Engineering consultation
Discuss Your Process Requirements
Tell our engineers about your material, target particle size, viscosity, capacity, and production goals.